高功率值小功率现场实验仪（耐焊弧现场实验仪）-（服务器的控制）

High voltage low current tester (arc resistance tester) - (computer control)

服务分类：耐电弧试验机

Product name: electric arc resistance tester

厂品类型：NDH-A

Product model: NDH - A

需求规格：GB/T 1411-2002《固态垃圾隔热食材耐高低平工作电流电弧自放电自放电的实验室检测》（符合IEC  61621-1997）及ASTM D495等标准的追求设计构思生产制造的，并具备IEC 149、UL 746A等试验台的方法

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

主要适用性范畴及职能：

本做实验的时候机是都按照应运于减速机、电子元件和挂式电子元件等领域的安装电工用PVC、硅胶粘合剂胶和隔热带层漆等隔热带层装修的原材料的耐电孤放电稳定性评估，主应用于膏状隔热带层装修的原材料如：PVC、膜、硅胶粘合剂、黑云母、陶瓷厂家、夹丝玻璃、隔热带层油、隔热带层漆、硬纸板等物料的耐电孤放电稳定性测式；

本测试机由计算出来机调节执行，能够显示信息现今状况检测英文壮态及检测英文事件，检测英文终结后并保存文档现今状况检测英文数剧，并可打印纸.细则研究报表。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 超声波焊接机为下合二为一设计，中下部为实操模式，顶部为疲劳恒温恒湿试验箱。

2 本成品使用*新智能化操纵新技术，在使用编译程序（IEC或ASTM）可自行完成经过多次实验发现，并在电子设备上出现冲击试验进程和结论。

3 **特性顺畅，抗电磁干扰力强，软件测试高精较高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 焊弧通断期限测量误差：高于 ±10ms

2 调压器功率：2kVA

3 额定容量检验相电压：12.5kV

4 检验工作电压定位精度：±3%

5 电压的控制精密度：±10%  工作电流量测精准度：1.5%

6 参比电极对试板经济压力：（0.5±0.05）N

7 工业建筑材料：钨棒

8 工业相距：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 安全使用工作环境温暖：（23±2）℃

10 便用氛围对室内温度的：（50±5）%

11 电源线：220V±5%  50Hz  10A

12 耐压试验    做法：   行业标准/美标/10 mA 连续性/20 mA 连着/30 mA连续不断/40 mA维持

13 实验室检测源程序有以下：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 物品规格型号：

NDH-A    耐焊弧实验室检测仪-微机调节

NDH-B    耐焊弧实验仪-触碰屏把控好

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！